Buy logisch.be ?
We are moving the project
logisch.be .
Are you interested in purchasing the domain
logisch.be ?
domain@kv-gmbh.de · 0541-91531010
Buy logisch.be ?
Does the TGB Bullet D-Ring run outside, but not faster?
The TGB Bullet D-Ring is designed for outdoor use and is capable of running at high speeds, making it suitable for off-road and outdoor adventures. Its rugged construction and powerful engine allow it to handle rough terrain and reach impressive speeds, providing an exhilarating riding experience. Therefore, the TGB Bullet D-Ring not only runs outside but also runs faster, making it a great choice for outdoor enthusiasts looking for a thrilling ride. **
How can the circular ring be rearranged to get to d?
To rearrange the circular ring to get to d, you can rotate the ring so that the letter d is at the top position. Then, you can slide the letters in a clockwise or counterclockwise direction to rearrange them until they form the word "d." This may involve moving the letters in a specific sequence to achieve the desired arrangement. **
Similar search terms for D-ring
Top-Angebote
Products related to D-ring:
-
Rebec A1200.dThe Rebec A1200.d is a 1-Channel Amplifier of Class D. The device achieves a maximum output power of 1200 W RMS at 1 Ohm. Its compact design has dimensions of 255 x 186 x 51 mm. For sound adjustment, adjustable high-pass and low-pass filters as well as bass boost are integrated. The frequency response is variable in the range of 10 Hz to 1 kHz. A signal-to-noise ratio of over 95 dB characterizes the technical specifications. Features 1-Channel Amplifier Amplifier Type Class D Output Power: 1x450 W RMS at 4 Ohm Output Power: 1x738 W RMS at 2 Ohm Output Power: 1x1200 W RMS at 1 Ohm Dimensions: 255 x 186 x 51 mm Signal-to-Noise Ratio: >95 dB (A-weighted) Bass Boost: 0–12 dB (45 Hz) Technical Specifications Frequency Response: 10 Hz–150 Hz (LPF) / 10 Hz–1 kHz (FULL) High-Pass Frequency: 10–50 Hz adjustable Low-Pass Frequency: 50–150 Hz adjustable Distortion (THD): <0.05 % Input Sensitivity: 0.3–6 Volts Input Impedance: 30 kOhm Operating Voltage: 10–16 Volts479,26 €*Shipping: 0,00 €Secure redirect to the provider
-
Rebec A1800.dThe A1800.d from Rebec is a 1-Channel Amplifier with a maximum output power of up to 1800 Watts. This model is based on a Class D amplifier type and features adjustable high-pass and low-pass frequencies. The bass boost can be adjusted in the range of 30 to 80 Hz between 0 and 12 dB. With a signal-to-noise ratio of over 95 dB and a distortion of less than 0.05 percent, the sound reproduction is excellent. The dimensions of the housing are 337 x 186 x 51 mm. The amplifier supports a frequency response of 10 Hz to 180 Hz or 1 kHz. Features 1-Channel Amplifier Amplifier type Class D Compact design Dimensions: 337 x 186 x 51 mm Adjustable high-pass filter: 0–50 Hz Adjustable low-pass filter: 40–180 Hz Customizable bass boost: 0–12 dB (30-80 Hz) Signal-to-noise ratio: >95 dB (A-weighted) Distortion (THD): <0.05 percent Technical Specifications Output power: 1 x 700 Watts RMS at 4 Ohms Output power: 1 x 1100 Watts RMS at 2 Ohms Output power: 1 x 1800 Watts RMS at 1 Ohm Frequency response: 10 Hz–180 Hz / 1 kHz Input sensitivity: 0.3–6 Volts Input impedance: 30 kOhm Operating voltage: 10–16 Volts578,92 €*Shipping: 0,00 €Secure redirect to the provider
-
Audiocontrol D-4.800The D-4.800, presented by Audiocontrol, is a 4-channel DSP amplifier that is as powerful as it is flexible. This remarkable device offers a combination of excellent amplifier technology and powerful matrix DSP. Whether you want to perfect your factory or retrofitted sound system down to the last detail, the D-4.800 offers numerous options for sound optimization with its innovative technology. You benefit from features such as active speaker inputs, line-level inputs and outputs and complete control over all functions, including 30 equalizer bands, signal delay and other special AudioControl functions. Thanks to its compact design in a solid cast aluminum housing, it is the perfect solution for OEM integrations and retrofits. characteristics Built-in DSP Configurable as 4/3/2-channel amplifier 4 x 200 watts at 2 ohms 4 x 125 watts at 4 ohms 400 watts at 4 ohms bridged AccuBASS® processing MILCTM Maximum Input Level Control (Patent Pending) GTOTM Signal Sense Active speaker-level inputs (6 channels) for OEM integration 4 preamplifier inputs 2 assignable preamp outputs Solid, one-piece aluminum housing Input and output RTA for precise and well-founded tuning input and output delay 12 and 24 dB/octave Linkwitz-Riley crossovers 30-band equalizer Optional AC-BT24 Bluetooth Streamer/Programmer The DM Smart DSP app is available for download for Mac/PC DM SMART DSP input tab output tab Dashboard Connect your laptop to the D-4.800 via AudioControl's DM Smart DSP app, a full-featured matrix DSP interface that gives you instant and clear control over every aspect of your processor. Route any input to any output, adjust gain, delay and polarity, and finely tune the D-4.800 with a 30-band EQ. High, low and bandpass can be adjusted for each output with 12 or 24 dB/octave Linkwitz-Riley crossovers. For OEM integration, you can utilize the input and output RTAs available for each input and output to easily identify and sum the factory speaker signals. With a clean user interface and intuitive workflow, AudioControl's DM Smart DSP app takes the guesswork out of tuning your system to your exact specifications. SPECIFICATIONS ENTRY Preamplifier inputs: 4 balanced Preamplifier input voltage range: 250 mV - 8 Vrms Speaker level inputs: 6 Input voltage range for speaker level: 3 V - 40 Vrms OUTPUTS Continuous (RMS) rated power at 14.4 V: 4 Ω - 125 W x 4 RMS 2 Ω - 200 W x 4 RMS Bridged 4 Ω - 400 W RMS Preamplifier outputs: 2 Maximum preamplifier output: 8.5 V RMS PERFORMANCE Frequency response: 20 Hz - 24 kHz Signal-to-noise ratio: 102 dBA, Ref 200 W @ 2 ohms THD+N: < 0.1% Power/ground wire size: 25mm² Fuse rating: 2 x 40 A WEIGHT & DIMENSIONS Dimensions: 22.8 x 20 x 5.3cm Weight: 2.3 kg1050,98 €*Shipping: 0,00 €Secure redirect to the provider
-
Audiocontrol D-6.1200The D-6.1200 from Audiocontrol is a powerful 6-channel DSP amplifier that offers an unparalleled combination of technology and flexibility. This device is more than just an ordinary amplifier. It is a carefully designed single-unit solution that provides exceptional performance and tuning flexibility for both factory and aftermarket sound systems. Features such as active speaker inputs, line-level inputs and outputs, as well as AccuBASS®, GTOTM Signal Sense, and MILCTM functions make the D-6.1200 a future-proof product that is compatible with both current and future car audio solutions. features Built-in DSP Configurable as a 6/5/4/3-channel amplifier 6 x 200 Watts at 2 Ohms 6 x 125 Watts at 4 Ohms 400 Watts at 4 Ohms bridged AccuBASS® processing MILCTM Maximum Input Level Control (patent pending) GTOTM-Signal Sampling Active speaker level inputs (8 channels) for OEM integration 6 preamplifier inputs 2 assignable preamplifier outputs Solid one-piece aluminum housing "Input and Output RTA for precise and informed coordination" Input and Output Delay 12 and 24 dB/octave Linkwitz-Riley crossovers 30-Band Equalizer Optional ACR-3 remote control for preset recall and level control Optional AC-BT24 Bluetooth streamer/programmer DM Smart DSP App available for download for Mac/PC ENTRANCES Preamp inputs: 6 balanced Preamplifier input voltage range: 250 mV - 8 Vrms Speaker level inputs: 8 Speaker level input voltage range: 3 V - 40 Vrms EXITS Continuous (RMS) rated power at 14.4 V: 4 Ω - 125 W x 6 RMS 2 Ω - 200 W x 6 RMS Bridged 4 Ω - 400 W RMS Preamp outputs: 2 Maximum preamplifier output: 8.5 V RMS performance capability Frequency response: 20 Hz - 24 kHz Noise level: 102 dBA, Ref 200 W @ 2 Ohm KLIRRFAKTOR+N: < 0.1% Power/Earth cable thickness: 25mm² Protection value: 3 x 40 A WEIGHT AND DIMENSIONS Dimensions: 30 x 20 x 5.3cm Weight: 3.2 kg DM SMART DSP Input Tab Output Tab DASHBOARD Connect your laptop to the D-6.1200 via the DM Smart DSP App from AudioControl, a fully equipped matrix DSP interface that gives you immediate and clear control over every aspect of your processor. "Route every input to every output, set Gain, Delay, and Polarity, and tune the D-6.1200 precisely with a 30-band EQ. High, Low, and Bandpass can be set for each output with 12 or 24 dB/octave Linkwitz-Riley filters." "For OEM integration, you can use the input and output RTAs that are available for each input and output to easily identify and sum the signals of the factory speakers." "With a clear user interface and an intuitive workflow, the AudioControl DM Smart DSP App makes guessing when tuning your system to your exact specifications unnecessary."1366,04 €*Shipping: 0,00 €Secure redirect to the provider
-
Do D/D/D monsters count as D/D monsters?
Yes, D/D/D monsters do count as D/D monsters. D/D/D monsters are a subgroup within the larger D/D archetype, so they share the same naming convention and are considered part of the D/D family. This means that cards or effects that specifically refer to D/D monsters would also apply to D/D/D monsters. **
-
What do the engraved numbers on a ring mean: 14 D 445?
The engraved numbers on a ring, such as "14 D 445," typically represent the ring's specific characteristics. In this case, "14" likely refers to the ring's karat weight, indicating that it is made of 14 karat gold. The "D" could stand for the manufacturer or designer of the ring. Lastly, "445" might be a unique identifier or serial number for that particular ring. **
-
How do you convert D-glucose from the chain form to the ring form?
To convert D-glucose from the chain form to the ring form, the first step is to form an aldehyde group at the end of the chain by converting the carbonyl group into an aldehyde. Then, the aldehyde group reacts with the hydroxyl group on the fifth carbon to form a hemiacetal, resulting in the formation of a six-membered ring. This process is known as mutarotation, and it results in the formation of a mixture of alpha and beta anomers of D-glucose in the ring form. **
-
What is logical reasoning?
Logical reasoning is the process of using rational thinking and evidence to come to a conclusion or make a decision. It involves analyzing information, identifying patterns, and drawing valid inferences based on the available facts. Logical reasoning helps individuals to think critically, solve problems, and make sound judgments by following a systematic and coherent thought process. It is an essential skill in various fields such as mathematics, science, philosophy, and everyday decision-making. **
What are D&D spells?
D&D spells are magical abilities that characters can use in the game Dungeons & Dragons. These spells can range from offensive attacks to healing and protective spells. Each spell has its own unique effects and requirements for use, and characters must have the appropriate level and abilities to cast them. Spells are a key component of gameplay and can greatly impact the outcome of battles and encounters in the game. **
Which type of bit is better suited: snaffle bit, D-ring bit, or curb bit?
The best type of bit depends on the individual horse and its training level. A snaffle bit is a good choice for young or green horses as it provides direct pressure on the mouth and is milder than other bits. The D-ring bit is a good option for horses that need a bit more stability and control, as the D-rings help to prevent the bit from sliding through the horse's mouth. A curb bit is best suited for more experienced and well-trained horses, as it provides leverage and can be used for more refined cues. Ultimately, the best bit choice depends on the horse's training, temperament, and the rider's skill level. **
Top-Angebote
Products related to D-ring:
-
Gladen AERO-RING 165The AERO-RING 165 from Gladen is a damping solution for sealing speakers and vehicle trim parts. The self-adhesive foam rings are made from durable EPDM material and feature a water- and sound-absorbing surface. With an outer diameter of 195 mm and an inner diameter of 140 mm, the product is designed for 165 mm format speakers, which corresponds to 6.5 inches. The set comes with a package content of two pieces. Features Damping Material: EPDM Self-adhesive foam rings Water-repellent surface Sound-absorbing surface Outer diameter: 195 mm Inner diameter: 140 mm Format: For 165 mm (6.5 inches) speakers Package content: 2 pieces25,06 €*Shipping: 11,67 €Secure redirect to the provider
-
Gladen AERO-RING 200The AERO-RING 200 from Gladen is a damping solution for speakers in the 200 mm (8 inch) format. These self-adhesive foam rings are made from water-repellent and sound-absorbing EPDM material. The outer diameter is 237 mm, while the inner diameter is 185 mm. They serve to seal between speakers and vehicle trim parts. The package includes two pieces of these rings. Features Damping Manufacturer: Gladen Material: EPDM Self-adhesive foam rings Water-repellent and sound-absorbing surface Outer diameter: 237 mm Inner diameter: 185 mm Format: 200 mm (8 inch) Package content: 2 pieces27,73 €*Shipping: 11,67 €Secure redirect to the provider
-
Rebec A1200.dThe Rebec A1200.d is a 1-Channel Amplifier of Class D. The device achieves a maximum output power of 1200 W RMS at 1 Ohm. Its compact design has dimensions of 255 x 186 x 51 mm. For sound adjustment, adjustable high-pass and low-pass filters as well as bass boost are integrated. The frequency response is variable in the range of 10 Hz to 1 kHz. A signal-to-noise ratio of over 95 dB characterizes the technical specifications. Features 1-Channel Amplifier Amplifier Type Class D Output Power: 1x450 W RMS at 4 Ohm Output Power: 1x738 W RMS at 2 Ohm Output Power: 1x1200 W RMS at 1 Ohm Dimensions: 255 x 186 x 51 mm Signal-to-Noise Ratio: >95 dB (A-weighted) Bass Boost: 0–12 dB (45 Hz) Technical Specifications Frequency Response: 10 Hz–150 Hz (LPF) / 10 Hz–1 kHz (FULL) High-Pass Frequency: 10–50 Hz adjustable Low-Pass Frequency: 50–150 Hz adjustable Distortion (THD): <0.05 % Input Sensitivity: 0.3–6 Volts Input Impedance: 30 kOhm Operating Voltage: 10–16 Volts479,26 €*Shipping: 0,00 €Secure redirect to the provider
-
Rebec A1800.dThe A1800.d from Rebec is a 1-Channel Amplifier with a maximum output power of up to 1800 Watts. This model is based on a Class D amplifier type and features adjustable high-pass and low-pass frequencies. The bass boost can be adjusted in the range of 30 to 80 Hz between 0 and 12 dB. With a signal-to-noise ratio of over 95 dB and a distortion of less than 0.05 percent, the sound reproduction is excellent. The dimensions of the housing are 337 x 186 x 51 mm. The amplifier supports a frequency response of 10 Hz to 180 Hz or 1 kHz. Features 1-Channel Amplifier Amplifier type Class D Compact design Dimensions: 337 x 186 x 51 mm Adjustable high-pass filter: 0–50 Hz Adjustable low-pass filter: 40–180 Hz Customizable bass boost: 0–12 dB (30-80 Hz) Signal-to-noise ratio: >95 dB (A-weighted) Distortion (THD): <0.05 percent Technical Specifications Output power: 1 x 700 Watts RMS at 4 Ohms Output power: 1 x 1100 Watts RMS at 2 Ohms Output power: 1 x 1800 Watts RMS at 1 Ohm Frequency response: 10 Hz–180 Hz / 1 kHz Input sensitivity: 0.3–6 Volts Input impedance: 30 kOhm Operating voltage: 10–16 Volts578,92 €*Shipping: 0,00 €Secure redirect to the provider
-
Does the TGB Bullet D-Ring run outside, but not faster?
The TGB Bullet D-Ring is designed for outdoor use and is capable of running at high speeds, making it suitable for off-road and outdoor adventures. Its rugged construction and powerful engine allow it to handle rough terrain and reach impressive speeds, providing an exhilarating riding experience. Therefore, the TGB Bullet D-Ring not only runs outside but also runs faster, making it a great choice for outdoor enthusiasts looking for a thrilling ride. **
-
How can the circular ring be rearranged to get to d?
To rearrange the circular ring to get to d, you can rotate the ring so that the letter d is at the top position. Then, you can slide the letters in a clockwise or counterclockwise direction to rearrange them until they form the word "d." This may involve moving the letters in a specific sequence to achieve the desired arrangement. **
-
Do D/D/D monsters count as D/D monsters?
Yes, D/D/D monsters do count as D/D monsters. D/D/D monsters are a subgroup within the larger D/D archetype, so they share the same naming convention and are considered part of the D/D family. This means that cards or effects that specifically refer to D/D monsters would also apply to D/D/D monsters. **
-
What do the engraved numbers on a ring mean: 14 D 445?
The engraved numbers on a ring, such as "14 D 445," typically represent the ring's specific characteristics. In this case, "14" likely refers to the ring's karat weight, indicating that it is made of 14 karat gold. The "D" could stand for the manufacturer or designer of the ring. Lastly, "445" might be a unique identifier or serial number for that particular ring. **
Similar search terms for D-ring
-
Audiocontrol D-4.800The D-4.800, presented by Audiocontrol, is a 4-channel DSP amplifier that is as powerful as it is flexible. This remarkable device offers a combination of excellent amplifier technology and powerful matrix DSP. Whether you want to perfect your factory or retrofitted sound system down to the last detail, the D-4.800 offers numerous options for sound optimization with its innovative technology. You benefit from features such as active speaker inputs, line-level inputs and outputs and complete control over all functions, including 30 equalizer bands, signal delay and other special AudioControl functions. Thanks to its compact design in a solid cast aluminum housing, it is the perfect solution for OEM integrations and retrofits. characteristics Built-in DSP Configurable as 4/3/2-channel amplifier 4 x 200 watts at 2 ohms 4 x 125 watts at 4 ohms 400 watts at 4 ohms bridged AccuBASS® processing MILCTM Maximum Input Level Control (Patent Pending) GTOTM Signal Sense Active speaker-level inputs (6 channels) for OEM integration 4 preamplifier inputs 2 assignable preamp outputs Solid, one-piece aluminum housing Input and output RTA for precise and well-founded tuning input and output delay 12 and 24 dB/octave Linkwitz-Riley crossovers 30-band equalizer Optional AC-BT24 Bluetooth Streamer/Programmer The DM Smart DSP app is available for download for Mac/PC DM SMART DSP input tab output tab Dashboard Connect your laptop to the D-4.800 via AudioControl's DM Smart DSP app, a full-featured matrix DSP interface that gives you instant and clear control over every aspect of your processor. Route any input to any output, adjust gain, delay and polarity, and finely tune the D-4.800 with a 30-band EQ. High, low and bandpass can be adjusted for each output with 12 or 24 dB/octave Linkwitz-Riley crossovers. For OEM integration, you can utilize the input and output RTAs available for each input and output to easily identify and sum the factory speaker signals. With a clean user interface and intuitive workflow, AudioControl's DM Smart DSP app takes the guesswork out of tuning your system to your exact specifications. SPECIFICATIONS ENTRY Preamplifier inputs: 4 balanced Preamplifier input voltage range: 250 mV - 8 Vrms Speaker level inputs: 6 Input voltage range for speaker level: 3 V - 40 Vrms OUTPUTS Continuous (RMS) rated power at 14.4 V: 4 Ω - 125 W x 4 RMS 2 Ω - 200 W x 4 RMS Bridged 4 Ω - 400 W RMS Preamplifier outputs: 2 Maximum preamplifier output: 8.5 V RMS PERFORMANCE Frequency response: 20 Hz - 24 kHz Signal-to-noise ratio: 102 dBA, Ref 200 W @ 2 ohms THD+N: < 0.1% Power/ground wire size: 25mm² Fuse rating: 2 x 40 A WEIGHT & DIMENSIONS Dimensions: 22.8 x 20 x 5.3cm Weight: 2.3 kg1050,98 €*Shipping: 0,00 €Secure redirect to the provider
-
Audiocontrol D-6.1200The D-6.1200 from Audiocontrol is a powerful 6-channel DSP amplifier that offers an unparalleled combination of technology and flexibility. This device is more than just an ordinary amplifier. It is a carefully designed single-unit solution that provides exceptional performance and tuning flexibility for both factory and aftermarket sound systems. Features such as active speaker inputs, line-level inputs and outputs, as well as AccuBASS®, GTOTM Signal Sense, and MILCTM functions make the D-6.1200 a future-proof product that is compatible with both current and future car audio solutions. features Built-in DSP Configurable as a 6/5/4/3-channel amplifier 6 x 200 Watts at 2 Ohms 6 x 125 Watts at 4 Ohms 400 Watts at 4 Ohms bridged AccuBASS® processing MILCTM Maximum Input Level Control (patent pending) GTOTM-Signal Sampling Active speaker level inputs (8 channels) for OEM integration 6 preamplifier inputs 2 assignable preamplifier outputs Solid one-piece aluminum housing "Input and Output RTA for precise and informed coordination" Input and Output Delay 12 and 24 dB/octave Linkwitz-Riley crossovers 30-Band Equalizer Optional ACR-3 remote control for preset recall and level control Optional AC-BT24 Bluetooth streamer/programmer DM Smart DSP App available for download for Mac/PC ENTRANCES Preamp inputs: 6 balanced Preamplifier input voltage range: 250 mV - 8 Vrms Speaker level inputs: 8 Speaker level input voltage range: 3 V - 40 Vrms EXITS Continuous (RMS) rated power at 14.4 V: 4 Ω - 125 W x 6 RMS 2 Ω - 200 W x 6 RMS Bridged 4 Ω - 400 W RMS Preamp outputs: 2 Maximum preamplifier output: 8.5 V RMS performance capability Frequency response: 20 Hz - 24 kHz Noise level: 102 dBA, Ref 200 W @ 2 Ohm KLIRRFAKTOR+N: < 0.1% Power/Earth cable thickness: 25mm² Protection value: 3 x 40 A WEIGHT AND DIMENSIONS Dimensions: 30 x 20 x 5.3cm Weight: 3.2 kg DM SMART DSP Input Tab Output Tab DASHBOARD Connect your laptop to the D-6.1200 via the DM Smart DSP App from AudioControl, a fully equipped matrix DSP interface that gives you immediate and clear control over every aspect of your processor. "Route every input to every output, set Gain, Delay, and Polarity, and tune the D-6.1200 precisely with a 30-band EQ. High, Low, and Bandpass can be set for each output with 12 or 24 dB/octave Linkwitz-Riley filters." "For OEM integration, you can use the input and output RTAs that are available for each input and output to easily identify and sum the signals of the factory speakers." "With a clear user interface and an intuitive workflow, the AudioControl DM Smart DSP App makes guessing when tuning your system to your exact specifications unnecessary."1366,04 €*Shipping: 0,00 €Secure redirect to the provider
-
Audiocontrol D-5.1300Discover the D-5.1300, a 5-channel DSP amplifier from the renowned manufacturer Audiocontrol. The D-5.1300 offers various features, including eight active speaker inputs, six line-level inputs, independent crossovers, and a 30-band EQ with Auto-EQ. Additionally, it includes functions such as signal summation, signal delay, built-in RTAs, and AccuBASS®. This puts control over your audio environment literally in your hands. The amplifier can be seamlessly integrated into OEM or aftermarket sound systems, providing an exceptional listening experience. Ideal for anyone who wants to enjoy the best possible audio performance. Features Built-in DSP Configurable as a 5- or 3-channel amplifier 4 x 200 Watt + 1 x 500 Watt @ 2 Ohm 4 x 100 Watts + 1 x 300 Watts at 4 Ohms 400 Watts @ 4 Ohms bridged AccuBASS® processing MILCTM Maximum Input Level Control (patent pending) GTOTM-Signal sampling Independent Linkwitz-Riley Alignment Crossovers Summarizable active speaker-level inputs (8 channels) for OEM integration 6 preamplifier inputs PFM subsonic filter Solid, one-piece aluminum housing "Input and Output RTA for precise and informed coordination" Input and Output Delay 12 and 24 dB/octave Linkwitz-Riley crossovers 30-band equalizer with auto-EQ Optional ACR-3 remote control for preset recall and level control Optional AC-BT24 Bluetooth Streamer/Programmer DM Smart DSP App available for download for Mac/PC ENTRANCES Preamp inputs: 6 balanced Preamplifier input voltage range: 500 mV - 6 Vrms Speaker level inputs: 8 Speaker level input voltage range: 3 V - 40 Vrms EXITS Continuous (RMS) rated power at 14.4 V: 4 Ω - 100 W x 4 + 300 W x 1 2 Ω - 200 W x 4 + 500 W x 1 Bridged 4 Ω - 400 W RMS Preamp outputs: 2 Maximum preamplifier output: 8.5 V RMS performance capability Frequency response: 20 Hz - 22 kHz Noise level: 102 dBA, Ref 200 W @ 2 Ohm THD+N: < 0.1% Current/Ground wire thickness: 25mm² Protection value: 4 x 30 A WEIGHT & DIMENSIONS Dimensions: 30 x 20 x 5.3cm Weight: 3.3 kg DM SMART DSP Input Tab Output Tab Dashboard The cross-platform DM Smart DSP app from AudioControl allows complete control over all tuning functions of the D-5.1300, including 30 EQ bands, signal delay, phase correction, AccuBASS®, GTO™ Signal Sense, MILC™ Clip Detection, as well as integrated input and output RTAs. With the optional AC-BT24 Bluetooth® streamer & programmer, you can access the DM Smart DSP from your smartphone or tablet and easily make level adjustments and retrieve presets with the new DM Control app.1434,46 €*Shipping: 0,00 €Secure redirect to the provider
-
DD Audio D-C6.5bThe D-C6.5b is a 6.5 inch (16.5 cm) Speaker Set from DD Audio featuring a Y35 grade magnet, as well as a short circuit ring and a short circuit cap made of copper. It includes a Kapton former CCA voice coil and a 25 mm silk dome tweeter. Polyfilm tweeter crossovers, a glass composite cone, and a rubber coating are present. The nominal power is 70 watts RMS, with a peak power of 245 watts. The frequency response ranges from 60 to 20 kHz at an SPL of 88 dB and an impedance of S3. The installation diameter is 142 mm, and the installation depth is 59.5 mm. Features 6.5 inch (16.5 cm) Speaker Set Y35 grade magnet Copper short circuit ring Copper short circuit cap Kapton former CCA voice coil 25 mm silk dome tweeter Polyfilm tweeter crossovers Glass composite cone Rubber coating Technical Specifications Speaker size: 165 mm RMS power: 70 watts Peak power: 245 watts Impedance: S3 Frequency response: 60–20 kHz SPL: 88 dB Installation diameter: 142 mm Installation depth: 59.5 mm180,19 €*Shipping: 0,00 €Secure redirect to the provider
-
How do you convert D-glucose from the chain form to the ring form?
To convert D-glucose from the chain form to the ring form, the first step is to form an aldehyde group at the end of the chain by converting the carbonyl group into an aldehyde. Then, the aldehyde group reacts with the hydroxyl group on the fifth carbon to form a hemiacetal, resulting in the formation of a six-membered ring. This process is known as mutarotation, and it results in the formation of a mixture of alpha and beta anomers of D-glucose in the ring form. **
-
What is logical reasoning?
Logical reasoning is the process of using rational thinking and evidence to come to a conclusion or make a decision. It involves analyzing information, identifying patterns, and drawing valid inferences based on the available facts. Logical reasoning helps individuals to think critically, solve problems, and make sound judgments by following a systematic and coherent thought process. It is an essential skill in various fields such as mathematics, science, philosophy, and everyday decision-making. **
-
What are D&D spells?
D&D spells are magical abilities that characters can use in the game Dungeons & Dragons. These spells can range from offensive attacks to healing and protective spells. Each spell has its own unique effects and requirements for use, and characters must have the appropriate level and abilities to cast them. Spells are a key component of gameplay and can greatly impact the outcome of battles and encounters in the game. **
-
Which type of bit is better suited: snaffle bit, D-ring bit, or curb bit?
The best type of bit depends on the individual horse and its training level. A snaffle bit is a good choice for young or green horses as it provides direct pressure on the mouth and is milder than other bits. The D-ring bit is a good option for horses that need a bit more stability and control, as the D-rings help to prevent the bit from sliding through the horse's mouth. A curb bit is best suited for more experienced and well-trained horses, as it provides leverage and can be used for more refined cues. Ultimately, the best bit choice depends on the horse's training, temperament, and the rider's skill level. **
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases. ** Note: Parts of this content were created by AI.