Buy logisch.be ?
We are moving the project
logisch.be .
Are you interested in purchasing the domain
logisch.be ?
domain@kv-gmbh.de · 0541-91531010
Buy logisch.be ?
What does K2 stand for?
K2 stands for Karakoram 2, which is the second-highest mountain in the world after Mount Everest. It is located in the Karakoram Range on the China-Pakistan border. K2 is known for its challenging climbing conditions and has a reputation for being one of the most difficult mountains to climb. **
Is it too much Vitamin K2?
Consuming too much Vitamin K2 is rare and unlikely to occur through diet alone. However, excessive intake of Vitamin K2 supplements may lead to potential side effects such as an increased risk of blood clotting. It is important to follow recommended daily allowances and consult with a healthcare provider before starting any new supplement regimen to ensure safe and appropriate intake levels. **
Audison Thesis TH K2 II P CORO
Thesis TH K2 II P CORO is a 6.5 inch (165 mm) Speaker Set from Audison. It is a 2-way component system with 4 Ohm impedance. The frequency response ranges from 40 Hz to 26 kHz. The sensitivity is 87 dB / SPL. The continuous power is 300 W, and the peak power is 150 W. The acoustic design is based on custom finite element simulation software. Features 6.5 inch (165 mm) Speaker Set 2-way component system Acoustic design based on custom finite element simulation software Technical Specifications Impedance: 4 Ohm Frequency response: 40 Hz – 26 kHz Sensitivity: 87 dB / SPL Continuous power: 300 W Peak power: 150 W Size: 165 mm (6.5 inch)
3443,19 €*
Shipping: 0,00 €
Secure redirect to the provider
Audison Thesis TH K2 II A CORO
Thesis TH K2 II A CORO is a 6.5 inch (16.5 cm) Speaker Set from Audison featuring the TH 1.5 II Violino and TH 6.5 II Sax. Continuous power handling is 150 W, peak power handling is 300 W, impedance is 4 Ohm, sensitivity is 87 dB, and frequency response is 40 Hz to 26 kHz. The 165 mm woofer uses a TPX cone, a 50 mm CCAR flat wire voice coil, low inductance, hi-excursion suspension, and an aluminum die-cast basket with four pairs of spokes. The 38 mm tweeter features a natural silk dome and a single-layer 34 mm CCAW voice coil. Neodymium magnets N48 H-grade in the woofer and N38 H-grade in the tweeter with 1.67 T*m in the gap. Air-Loading System and Violino Tuning System with Bottom Case or Bottom Disk, FEM-optimized geometries and front plate, as well as laser vibrometer-supported optimization. Crossover Type 34 with adjustable crossover cut. Features 6.5 inch (16.5 cm) Speaker Set Set components: TH 1.5 II Violino tweeter and TH 6.5 II Sax woofer Crossover Type 34 Adjustable crossover cut in the frequency range Woofer cone material TPX Tweeter with 38 mm natural silk dome Single-layer 34 mm CCAW voice coil tweeter 50 mm CCAR flat wire voice coil woofer N38 H-grade neodymium magnet tweeter, 1.67 T*m in the magnet gap N48 H-grade neodymium magnet woofer Air-Loading System TH 1.5 II Violino Tuning System with Bottom Case or Bottom Disk FEM-optimized front plate and spokes; magnet group geometry FEM-optimized Aluminum die-cast basket, one piece, four pairs of spokes Low inductance of the woofer voice coil Hi-excursion suspension and spider Membrane and radiation geometry optimized by simulation Sensitivity 87 dB Impedance 4 Ohm Frequency response 40 Hz - 26 kHz Continuous power handling 150 W Peak power handling 300 W Technical Specifications Woofer size 165 mm Cone diameter woofer 130 mm Tweeter size 38 mm Voice coil diameter woofer 50 mm Xmax woofer 5.4 mm Re woofer 3.8 Ohm Fs woofer 55 Hz Le woofer 0.43 mH @ 1 kHz Vas woofer 8.6 l Mms woofer 24.2 g Cms woofer 0.35 Bxl woofer 8.2 Qts woofer 0.43 Qms woofer 5.3 Qes tweeter 0.83 Spl woofer 87 dB Weight woofer 1.25 kg Weight tweeter 0.355 kg
1853,32 €*
Shipping: 0,00 €
Secure redirect to the provider
Similar search terms for Audison-Thesis-TH-K2
Top-Angebote
Products related to Audison-Thesis-TH-K2:
-
Audison Thesis TH unoThe Audison Thesis TH uno is a 1-Channel Amplifier in A-Class design with integrated 24-bit/192 kHz DA converters and compatibility with Audison Full DA HD technology. SPDIF and AD-Link optical inputs support up to 8 digital channels at the RJ-45 connection. The minimum impedance is 1 Ω and the total RMS power is 1500 W. The bandwidth is 5 – 40 kHz, the S/N ratio (A-weighted @1 V) is 106 dBA, and the damping factor is 500. Dual-Mono construction with four power supplies in Synchro-PWM configuration and a chassis made from extruded aluminum CNC are included. A sensitivity control with 256 steps and 120 dB resolution, selectable presets for energy saving, Hi-Current, Hi-AB Class, and A Class, as well as digital control via integrated setting field, DRC, and PC software are available. Low Level Input is present, Hi Level Input is not. Features 1-Channel Amplifier Amplifier Class: A-Class Total RMS Power: 1500 W Output Power (RMS) @ 4 Ω: 850 W x 1 Output Power (RMS) @ 2 Ω: 1500 W x 1 Output Power (RMS) @ 1 Ω: 2300 W x 1 Minimum Impedance: 1 Ω SPDIF and AD-Link optical inputs (up to 192 kHz/24 bit) Supports up to 8 digital channels at the RJ-45 connection Integrated 24-bit/192 kHz DA converter Dual-Mono construction with four power supplies in Synchro-PWM configuration Sensitivity control with 256 steps and 120 dB resolution Presets: Energy saving, Hi-Current, Hi-AB Class, A Class (selectable in real-time) Digital control via integrated setting field, DRC, and PC software Crossover module included Chassis made from extruded, CNC-crafted aluminum Low Level Input: Yes Hi Level Input: No Linked Amplifiers: Master/Slave Bridged; Slave Chain Technical Specifications Channels: 1 Supply Voltage: 11 – 15 VDC Fuse: 150 A Idle Current when Off: 0.04 mA Power Consumption @ 14.4 VDC, 2 Ω, maximum music power: 132 A Remote OUT: 12 VDC (20 mA) Remote IN: 7 – 15 VDC (1 mA) Distortion (THD) @ 100 Hz, 4 Ω, 70 % rated power: 0.01 % Bandwidth (-3 dB, 2 VRMS, 4 Ω): 5 – 40 kHz S/N Ratio (A-weighted @ 1 V): 106 dBA Damping Factor (1 kHz, 4 Ω): 500 Input Sensitivity Pre-In: 0.3 – 4.8 VRMS Input Impedance Pre-In: 15 kΩ Adjustable Crossover: No CEA Output Power @ 4 Ω, 1 % THD+N, 14.4 V: 700 W x 1 channel CEA S/N Ratio (ref. 1 W output): 75 dBA Inputs: PRE and S/PDIF (optical, up to 192 kHz/24 bit) and AD Link Filter Outputs: PRE Bypass / AD Link Filter Pass: Removable kit, Hi-pass/Lo-pass/Bandpass 12/24 dB, 32 steps, 18 – 7.5 kHz, 8 standard and 2 customizable modules Weight: 10.3 kg Dimension A: 510 mm Dimension B: 478 mm Dimension C: 259 mm Dimension D: 160 mm2652,28 €*Shipping: 0,00 €Secure redirect to the provider
-
Audison Thesis TH dueThesis TH due is a 2-Channel Amplifier from Audison. The total RMS power is 1000 W, with 300 W x 2 at 4 Ω, 500 W x 2 at 2 Ω, and 750 W x 2 at 1 Ω; in bridged mode 1000 W x 1 at 4 Ω and 1500 W x 1 at 2 Ω; in Dual Power Mode (A Class) 80 W x 2 at 4 Ω. Amplifier class A-Class, dual-mono construction with four power supplies in Synchro-PWM. Integrated 24-bit/192 kHz D/A converter, PRE and optical digital inputs (S/PDIF, AD Link) up to 192 kHz/24 bit, compatible with Audison Full DA HD and Hi-Res audio files with listening certificate, up to 8 digital channels on RJ-45. Bandwidth 5–70 kHz, THD 0.02 % @ 1 kHz/4 Ω/90 % power, signal-to-noise ratio 106 dBA (A, @1 V), damping factor 100 (1 kHz, 2 VRMS, 4 Ω). Input sensitivity 0.3–4.8 VRMS and Pre-In impedance 15 kΩ; Low Level Input yes, High Level Input no, digital input yes. Supply 11–15 VDC, idle current 2 A, quiescent current 0.04 mA (off), current consumption @14.4 VDC/2 Ω/Max Music 105 A, Fuse 100 A. Dimensions A 510 mm, B 478 mm, C 259 mm, D 160 mm, weight 10.3 kg; chassis made of solid, extruded aluminum, Crossover module included (Hi-pass/Lo-pass/Bandpass 12/24 dB, 32 steps 18–7.5 kHz, PRE Bypass/AD Link) as well as real-time presets and digital control via integrated setting field, DRC, and PC software. Features 2-Channel Amplifier Total RMS power 1000 W Output power (RMS) 300 W x 2 at 4 Ω Output power (RMS) 500 W x 2 at 2 Ω Output power (RMS) 750 W x 2 at 1 Ω Output power (RMS) 1000 W x 1 at 4 Ω (bridged) Output power (RMS) 1500 W x 1 at 2 Ω (bridged) Dual Power Mode (A Class) 80 W x 2 at 4 Ω Amplifier class A-Class Dual-mono construction with four power supplies in Synchro-PWM Integrated 24-bit / 192 kHz D/A converter Digital inputs S/PDIF and AD Link (optical), up to 192 kHz / 24 bit Compatibility with Audison Full DA HD and Hi-Res audio files with listening certificate Low Level Input Yes High Level Input No Digital Input Yes Sensitivity control with 256 steps and 120 dB resolution Real-time presets: Energy Saving, Hi-Current, Hi-AB Class, A Class Digital control via integrated setting field, DRC, and PC software High-quality Crossover module included Filter outputs PRE Bypass / AD Link Filter module: Hi-pass / Lo-pass / Bandpass 12/24 dB, 32 steps 18–7.5 kHz, 8 standard and 2 customizable modules Complementary differential circuit with current mirror Cascade driver of class A with inverted complementary triple output stage Chassis made of solid, extruded aluminum, CNC manufactured Dimension A 510 mm Dimension B 478 mm Dimension C 259 mm Dimension D 160 mm Weight 10.3 kg Technical Specifications Channels 2 Supply voltage 11–15 VDC Idle current 2 A Quiescent current in off state 0.04 mA Power consumption @ 14.4 VDC, 2 Ω, maximum music power 105 A Remote OUT 12 VDC (20 mA) Remote IN 7–15 VDC (1 mA) Distortion THD 0.02 % @ 1 kHz, 4 Ω, 90 % power Bandwidth 5–70 kHz (A, -3 dB, 2 VRMS, 4 Ω) Signal-to-noise ratio 106 dBA (A, weighted @ 1 V) Damping factor 100 (1 kHz, 2 VRMS, 4 Ω) Input sensitivity...2652,28 €*Shipping: 0,00 €Secure redirect to the provider
-
Audison Thesis TH quattroAudison Thesis TH quattro is a 4-Channel Amplifier with A-Class functionality and a total RMS power of 1040 W; delivers 160 W x 4 at 4 Ohm, 260 W x 4 at 2 Ohm, and 340 W x 4 at 1 Ohm at 14.4 VDC, 1 % THD. Integrated 24-bit/192 kHz DA converter, SPDIF and AD Link digital inputs (optical), compatibility with Audison Full DA HD and Hi-Res audio files. Internal microprocessor for adjustment and management functions, digital control via integrated adjustment field, DRC, and PC software. Dual-Mono construction with four power supplies in Synchro-PWM, complementary differential circuit with current mirror, and cascoded A-Class drivers with inverted complementary triple output stage. Sensitivity control with 256 steps and 120 dB resolution, presets Energy Saving, Hi-Current, Hi-AB Class, and A Class selectable in real-time. Bandwidth 5–70 kHz, S/N 104 dBA, damping factor 80, supply voltage 11–15 VDC. Low Level Input available, Hi Level Input not available, digital input available; Remote In 7–15 VDC (1 mA), Remote Out 12 VDC (20 mA), power consumption at 14.4 VDC and 2 Ohm max. music power 105 A, idle current in off state 0.04 mA. Chassis made of solid, extruded aluminum, CNC manufactured; high-quality Crossover module included. Features 4-Channel Amplifier Integrated 24-bit/192 kHz DA converter Digital inputs: SPDIF (optical) and AD Link, up to 8 digital channels on RJ-45 Compatible with Audison Full DA HD and Hi-Res audio files Dual-Mono construction with four power supplies in Synchro-PWM Complementary differential circuit with current mirror Cascoded A-Class drivers with inverted complementary triple output stage Sensitivity control with 256 steps and 120 dB resolution Presets: Energy Saving, Hi-Current, Hi-AB Class, A Class, selectable in real-time Digital control via integrated adjustment field, DRC, and PC software High-quality Crossover module included Chassis made of solid, extruded aluminum, CNC manufactured Low Level Input: Yes Hi Level Input: No Digital input: Yes Technical Specifications Channels: 4 Amplifier Class: A-Class Supply Voltage: 11–15 VDC Idle current in off state: 0.04 mA Power consumption @ 14.4 VDC, 2 Ohm, max. music power: 105 A Remote OUT: 12 VDC (20 mA) Remote IN: 7–15 VDC (1 mA) THD: 0.03 % @ 1 kHz, 4 Ohm, 90 % power Bandwidth (-3 dB, 2 VRMS, 4 Ohm): 5–70 kHz S/N (A-weighted @ 1 V): 104 dBA Damping factor (1 kHz, 2 VRMS, 4 Ohm): 80 Input sensitivity Pre-In (two ranges): 0.3–4.8 VRMS Pre-In impedance: 15 kOhm Total RMS power: 1040 W Output power (RMS) @ 14.4 VDC, 1 % THD: 4 Channel @ 4 Ohm: 160 W x 4 Output power (RMS) @ 14.4 VDC, 1 % THD: 4 Channel @ 2 Ohm: 260 W x 4 Output power (RMS) @ 14.4 VDC, 1 % THD: 4 Channel @ 1 Ohm: 340 W x 4 Output power (RMS) @ 14.4 VDC, 1 % THD: 3 Channel @ 4 Ohm: 150 W x 2 + 540 W x 1 Output power (RMS) @ 14.4 VDC, 1 % THD: 3 Channel @ 2 Ohm: 250 W x 2 + 650 W x 1 Output power (RMS) @ 14.4 VDC, 1 % THD: 2 Channel @ 4 Ohm: 500 W x 2 Output power (RMS) @ 14.4 VDC, 1 % THD: 2 Channel @ 2 Ohm: 700...3149,78 €*Shipping: 0,00 €Secure redirect to the provider
-
Audison Thesis TH 1.5 II violinoThesis TH 1.5 II violino is a Dome Tweeter from Audison with a size of 38 mm and an impedance of 6 Ohms. The single-layer 34 mm CCAW voice coil and the custom N38 H-Grade neodymium magnet are integrated. The 38 mm natural silk dome, cone material TETOLON FIBER, and membrane material TELOTON FIBRE are specified. The frequency response ranges from 800 Hz to 26 kHz, with a peak power handling of 200 W. eID technology and the TH 1.5 II Violino Tuning System with floor housing or floor disc are present. An exclusive air loading system with a resonance frequency below 800 Hz, as well as FEM-optimized front plate and front spokes, are part of the fully solid metal construction. Features Dome Tweeter Size 38 mm Impedance 6 Ohms Peak power handling 200 W Frequency response 800 Hz to 26 kHz Single-layer 34 mm CCAW voice coil Neodymium magnet (N38 H-Grade) 38 mm natural silk dome eID technology TH 1.5 II Violino Tuning System (floor housing or floor disc) Exclusive air loading system (resonance frequency below 800 Hz; filter settings from 1.5 kHz, 12 dB/Oct.) FEM-optimized front plate and front spokes Fully solid metal construction Cone material TETOLON FIBER Membrane material TELOTON FIBRE Technical Specifications Voice coil diameter 34 mm Re 6.1 Ohms Fs 780 Hz Vas 0.019 l Mms 0.43 g Cms 0.09 mm/N BL 3.32 T·m Qms 2.9 Qts 0.83 Membrane area 38 cm² Le 0.025 mH Reference Efficiency 92.5 Sound pressure level 92.5 dB Weight 0.355 kg Dimension A 71.8 mm Dimension C 37.4 mm Dimension D 22.4 mm Power consumption with crossover: Hi-Pass at 1.8 kHz, 12 dB/Oct.735,85 €*Shipping: 0,00 €Secure redirect to the provider
-
What is every x-th?
"Every x-th" refers to every item or occurrence that is separated by a specific interval of x. For example, "every 3rd" would mean every third item or occurrence in a sequence. This concept is often used to organize or categorize data, events, or items in a systematic way. **
-
Should one take Vitamin D3 with K2?
Yes, it is generally recommended to take Vitamin D3 with K2. Vitamin D3 helps with calcium absorption and bone health, while Vitamin K2 helps to ensure that calcium is properly utilized in the body and directed to the bones instead of accumulating in the arteries. Taking these two vitamins together can help support overall bone health and cardiovascular health. However, it is always best to consult with a healthcare provider before starting any new supplement regimen. **
-
What is logical reasoning?
Logical reasoning is the process of using rational thinking and evidence to come to a conclusion or make a decision. It involves analyzing information, identifying patterns, and drawing valid inferences based on the available facts. Logical reasoning helps individuals to think critically, solve problems, and make sound judgments by following a systematic and coherent thought process. It is an essential skill in various fields such as mathematics, science, philosophy, and everyday decision-making. **
-
How does Vitamin D work together with K2?
Vitamin D and K2 work together synergistically to support bone health. Vitamin D helps the body absorb calcium from the intestines, while Vitamin K2 helps to direct the calcium to the bones and teeth, where it is needed, and away from soft tissues where it can be harmful. This collaboration between the two vitamins ensures that calcium is properly utilized in the body, promoting strong bones and overall health. **
Audison Thesis TH 6.5 II sax
Thesis TH 6.5 II sax is a 6.5 inch (16.5 cm) midbass driver from Audison with a nominal power handling of 150 W and a peak power handling of 300 W at 4 Ohm. The frequency response is specified as 40–4500 Hz, the linear excursion is 5.4 mm, and the sensitivity is 87 dB. The voice coil has a diameter of 50 mm and low inductance, with the voice coil material specified as Copper Clad Aluminium Ribbon. Neodymium is used as the magnet, including N48 H-Grade specification and geometrically optimized magnet group via Finite Element Simulation. The diaphragm is made of TPX® with simulated geometry, and the basket is one-piece aluminum die-cast with four pairs of spokes. The suspension and spider are designed as Hi-excursion, and eID technology is integrated. Features 6.5 Inch (16.5 cm) Midbass Driver Continuous Power Handling 150 W Peak Power Handling 300 W Impedance 4 Ohm Frequency Response 40–4500 Hz Xmax 5.4 mm Voice Coil Ø 50 mm Voice Coil Material CCAR (Copper Clad Aluminium Ribbon), Flat Wire Wound N48 H-Grade Neodymium Magnet Magnet Group Design via Finite Element Simulation Cone Material TPX® One-piece Aluminum Die-Cast Basket with Four Pairs of Spokes Low Inductance of the Voice Coil Hi-excursion Suspension and Spider eID Technology Technical Data Size 165 mm Voice coil material CCAP – Copper Clad Aluminium Ribbon D 130 mm Re 3.8 Ohm Fs 55 Hz Vas 8.6 l Mms 24.2 g Cms 0.35 mm/N BL 8.2 T·m Qms 5.3 Qes 0.47 Qts 0.43 Le 0.43 mH SPL 87 dB Weight 1.25 kg Dimension A 165 mm Measurement B 143 mm Measurement C 84 mm Measurement D 74.5 mm Measurement E 170.5 mm Measurement F 30
978,04 €*
Shipping: 0,00 €
Secure redirect to the provider
Audison Thesis TH 3.0 II voce
The Audison Thesis TH 3.0 II voice is a 3 inch (8 cm) midrange driver with a size of 70 mm and an impedance of 4 Ohm. The frequency response ranges from 110 to 5700 Hz. It features a SPECIAL NEODYMIUM N38H magnet, a TPX® diaphragm, and a 30.5 mm voice coil made of Copper Clad Aluminum Ribbon. An aluminum demodulation ring, a motor geometry developed through finite element simulation, and an aluminum die-cast basket with four pairs of spokes are integrated. The suspension and spider are designed for high excursion. Xmax is 3.3 mm. eID technology for traceability is included. Features 3 inch (8 cm) midrange driver Size 70 mm Impedance 4 Ohm Frequency response 110 - 5700 Hz Voice coil Ø 30.5 mm Voice coil material CCAP - COPPER CLAD ALUMINUM RIBBON Peak power handling 110 W Continuous power handling 55 W Magnet material SPECIAL NEODYMIUM N38H Xmax 3.3 mm Diaphragm material TPX® Aluminum demodulation ring Motor geometry using finite element simulation software Basket made of aluminum die-cast with four pairs of spokes Suspension and spider designed for very high excursion eID Technology Technical Data D 66.75 mm Re 3.4 Ohm Fs 100 Hz Vas 1.01 l Mms 4.3 g Cms 0.59 mm/N BL 4.2 T·m Qms 5.5 Qts 0.48 Qes 0.52 Le Standard 0.18 mH Spl 85.6 dB Weight 0.25 kg Dimension A 84 mm Size B 73.5 mm Size C 45 mm Size D 37 mm Size E 89 mm Size F 18
804,71 €*
Shipping: 0,00 €
Secure redirect to the provider
Can you play ice hockey with K2 skates?
No, K2 skates are designed for inline skating and are not suitable for playing ice hockey. Ice hockey skates are specifically designed with a blade for gliding on ice and providing stability and control while playing the sport. Using K2 skates for ice hockey would not only be unsafe due to the lack of proper support and blade design, but it would also hinder the player's ability to perform on the ice. **
Where can one watch The K2 in German?
The K2 is available for streaming in German on the platform Rakuten TV. It is also available for purchase or rental on Amazon Prime Video in German. Additionally, the show may be available on other streaming platforms or TV channels that offer Korean dramas with German dubbing or subtitles. **
Top-Angebote
Products related to Audison-Thesis-TH-K2:
-
Audison Thesis TH K2 II P COROThesis TH K2 II P CORO is a 6.5 inch (165 mm) Speaker Set from Audison. It is a 2-way component system with 4 Ohm impedance. The frequency response ranges from 40 Hz to 26 kHz. The sensitivity is 87 dB / SPL. The continuous power is 300 W, and the peak power is 150 W. The acoustic design is based on custom finite element simulation software. Features 6.5 inch (165 mm) Speaker Set 2-way component system Acoustic design based on custom finite element simulation software Technical Specifications Impedance: 4 Ohm Frequency response: 40 Hz – 26 kHz Sensitivity: 87 dB / SPL Continuous power: 300 W Peak power: 150 W Size: 165 mm (6.5 inch)3443,19 €*Shipping: 0,00 €Secure redirect to the provider
-
Audison Thesis TH K2 II A COROThesis TH K2 II A CORO is a 6.5 inch (16.5 cm) Speaker Set from Audison featuring the TH 1.5 II Violino and TH 6.5 II Sax. Continuous power handling is 150 W, peak power handling is 300 W, impedance is 4 Ohm, sensitivity is 87 dB, and frequency response is 40 Hz to 26 kHz. The 165 mm woofer uses a TPX cone, a 50 mm CCAR flat wire voice coil, low inductance, hi-excursion suspension, and an aluminum die-cast basket with four pairs of spokes. The 38 mm tweeter features a natural silk dome and a single-layer 34 mm CCAW voice coil. Neodymium magnets N48 H-grade in the woofer and N38 H-grade in the tweeter with 1.67 T*m in the gap. Air-Loading System and Violino Tuning System with Bottom Case or Bottom Disk, FEM-optimized geometries and front plate, as well as laser vibrometer-supported optimization. Crossover Type 34 with adjustable crossover cut. Features 6.5 inch (16.5 cm) Speaker Set Set components: TH 1.5 II Violino tweeter and TH 6.5 II Sax woofer Crossover Type 34 Adjustable crossover cut in the frequency range Woofer cone material TPX Tweeter with 38 mm natural silk dome Single-layer 34 mm CCAW voice coil tweeter 50 mm CCAR flat wire voice coil woofer N38 H-grade neodymium magnet tweeter, 1.67 T*m in the magnet gap N48 H-grade neodymium magnet woofer Air-Loading System TH 1.5 II Violino Tuning System with Bottom Case or Bottom Disk FEM-optimized front plate and spokes; magnet group geometry FEM-optimized Aluminum die-cast basket, one piece, four pairs of spokes Low inductance of the woofer voice coil Hi-excursion suspension and spider Membrane and radiation geometry optimized by simulation Sensitivity 87 dB Impedance 4 Ohm Frequency response 40 Hz - 26 kHz Continuous power handling 150 W Peak power handling 300 W Technical Specifications Woofer size 165 mm Cone diameter woofer 130 mm Tweeter size 38 mm Voice coil diameter woofer 50 mm Xmax woofer 5.4 mm Re woofer 3.8 Ohm Fs woofer 55 Hz Le woofer 0.43 mH @ 1 kHz Vas woofer 8.6 l Mms woofer 24.2 g Cms woofer 0.35 Bxl woofer 8.2 Qts woofer 0.43 Qms woofer 5.3 Qes tweeter 0.83 Spl woofer 87 dB Weight woofer 1.25 kg Weight tweeter 0.355 kg1853,32 €*Shipping: 0,00 €Secure redirect to the provider
-
Audison Thesis TH unoThe Audison Thesis TH uno is a 1-Channel Amplifier in A-Class design with integrated 24-bit/192 kHz DA converters and compatibility with Audison Full DA HD technology. SPDIF and AD-Link optical inputs support up to 8 digital channels at the RJ-45 connection. The minimum impedance is 1 Ω and the total RMS power is 1500 W. The bandwidth is 5 – 40 kHz, the S/N ratio (A-weighted @1 V) is 106 dBA, and the damping factor is 500. Dual-Mono construction with four power supplies in Synchro-PWM configuration and a chassis made from extruded aluminum CNC are included. A sensitivity control with 256 steps and 120 dB resolution, selectable presets for energy saving, Hi-Current, Hi-AB Class, and A Class, as well as digital control via integrated setting field, DRC, and PC software are available. Low Level Input is present, Hi Level Input is not. Features 1-Channel Amplifier Amplifier Class: A-Class Total RMS Power: 1500 W Output Power (RMS) @ 4 Ω: 850 W x 1 Output Power (RMS) @ 2 Ω: 1500 W x 1 Output Power (RMS) @ 1 Ω: 2300 W x 1 Minimum Impedance: 1 Ω SPDIF and AD-Link optical inputs (up to 192 kHz/24 bit) Supports up to 8 digital channels at the RJ-45 connection Integrated 24-bit/192 kHz DA converter Dual-Mono construction with four power supplies in Synchro-PWM configuration Sensitivity control with 256 steps and 120 dB resolution Presets: Energy saving, Hi-Current, Hi-AB Class, A Class (selectable in real-time) Digital control via integrated setting field, DRC, and PC software Crossover module included Chassis made from extruded, CNC-crafted aluminum Low Level Input: Yes Hi Level Input: No Linked Amplifiers: Master/Slave Bridged; Slave Chain Technical Specifications Channels: 1 Supply Voltage: 11 – 15 VDC Fuse: 150 A Idle Current when Off: 0.04 mA Power Consumption @ 14.4 VDC, 2 Ω, maximum music power: 132 A Remote OUT: 12 VDC (20 mA) Remote IN: 7 – 15 VDC (1 mA) Distortion (THD) @ 100 Hz, 4 Ω, 70 % rated power: 0.01 % Bandwidth (-3 dB, 2 VRMS, 4 Ω): 5 – 40 kHz S/N Ratio (A-weighted @ 1 V): 106 dBA Damping Factor (1 kHz, 4 Ω): 500 Input Sensitivity Pre-In: 0.3 – 4.8 VRMS Input Impedance Pre-In: 15 kΩ Adjustable Crossover: No CEA Output Power @ 4 Ω, 1 % THD+N, 14.4 V: 700 W x 1 channel CEA S/N Ratio (ref. 1 W output): 75 dBA Inputs: PRE and S/PDIF (optical, up to 192 kHz/24 bit) and AD Link Filter Outputs: PRE Bypass / AD Link Filter Pass: Removable kit, Hi-pass/Lo-pass/Bandpass 12/24 dB, 32 steps, 18 – 7.5 kHz, 8 standard and 2 customizable modules Weight: 10.3 kg Dimension A: 510 mm Dimension B: 478 mm Dimension C: 259 mm Dimension D: 160 mm2652,28 €*Shipping: 0,00 €Secure redirect to the provider
-
Audison Thesis TH dueThesis TH due is a 2-Channel Amplifier from Audison. The total RMS power is 1000 W, with 300 W x 2 at 4 Ω, 500 W x 2 at 2 Ω, and 750 W x 2 at 1 Ω; in bridged mode 1000 W x 1 at 4 Ω and 1500 W x 1 at 2 Ω; in Dual Power Mode (A Class) 80 W x 2 at 4 Ω. Amplifier class A-Class, dual-mono construction with four power supplies in Synchro-PWM. Integrated 24-bit/192 kHz D/A converter, PRE and optical digital inputs (S/PDIF, AD Link) up to 192 kHz/24 bit, compatible with Audison Full DA HD and Hi-Res audio files with listening certificate, up to 8 digital channels on RJ-45. Bandwidth 5–70 kHz, THD 0.02 % @ 1 kHz/4 Ω/90 % power, signal-to-noise ratio 106 dBA (A, @1 V), damping factor 100 (1 kHz, 2 VRMS, 4 Ω). Input sensitivity 0.3–4.8 VRMS and Pre-In impedance 15 kΩ; Low Level Input yes, High Level Input no, digital input yes. Supply 11–15 VDC, idle current 2 A, quiescent current 0.04 mA (off), current consumption @14.4 VDC/2 Ω/Max Music 105 A, Fuse 100 A. Dimensions A 510 mm, B 478 mm, C 259 mm, D 160 mm, weight 10.3 kg; chassis made of solid, extruded aluminum, Crossover module included (Hi-pass/Lo-pass/Bandpass 12/24 dB, 32 steps 18–7.5 kHz, PRE Bypass/AD Link) as well as real-time presets and digital control via integrated setting field, DRC, and PC software. Features 2-Channel Amplifier Total RMS power 1000 W Output power (RMS) 300 W x 2 at 4 Ω Output power (RMS) 500 W x 2 at 2 Ω Output power (RMS) 750 W x 2 at 1 Ω Output power (RMS) 1000 W x 1 at 4 Ω (bridged) Output power (RMS) 1500 W x 1 at 2 Ω (bridged) Dual Power Mode (A Class) 80 W x 2 at 4 Ω Amplifier class A-Class Dual-mono construction with four power supplies in Synchro-PWM Integrated 24-bit / 192 kHz D/A converter Digital inputs S/PDIF and AD Link (optical), up to 192 kHz / 24 bit Compatibility with Audison Full DA HD and Hi-Res audio files with listening certificate Low Level Input Yes High Level Input No Digital Input Yes Sensitivity control with 256 steps and 120 dB resolution Real-time presets: Energy Saving, Hi-Current, Hi-AB Class, A Class Digital control via integrated setting field, DRC, and PC software High-quality Crossover module included Filter outputs PRE Bypass / AD Link Filter module: Hi-pass / Lo-pass / Bandpass 12/24 dB, 32 steps 18–7.5 kHz, 8 standard and 2 customizable modules Complementary differential circuit with current mirror Cascade driver of class A with inverted complementary triple output stage Chassis made of solid, extruded aluminum, CNC manufactured Dimension A 510 mm Dimension B 478 mm Dimension C 259 mm Dimension D 160 mm Weight 10.3 kg Technical Specifications Channels 2 Supply voltage 11–15 VDC Idle current 2 A Quiescent current in off state 0.04 mA Power consumption @ 14.4 VDC, 2 Ω, maximum music power 105 A Remote OUT 12 VDC (20 mA) Remote IN 7–15 VDC (1 mA) Distortion THD 0.02 % @ 1 kHz, 4 Ω, 90 % power Bandwidth 5–70 kHz (A, -3 dB, 2 VRMS, 4 Ω) Signal-to-noise ratio 106 dBA (A, weighted @ 1 V) Damping factor 100 (1 kHz, 2 VRMS, 4 Ω) Input sensitivity...2652,28 €*Shipping: 0,00 €Secure redirect to the provider
-
What does K2 stand for?
K2 stands for Karakoram 2, which is the second-highest mountain in the world after Mount Everest. It is located in the Karakoram Range on the China-Pakistan border. K2 is known for its challenging climbing conditions and has a reputation for being one of the most difficult mountains to climb. **
-
Is it too much Vitamin K2?
Consuming too much Vitamin K2 is rare and unlikely to occur through diet alone. However, excessive intake of Vitamin K2 supplements may lead to potential side effects such as an increased risk of blood clotting. It is important to follow recommended daily allowances and consult with a healthcare provider before starting any new supplement regimen to ensure safe and appropriate intake levels. **
-
What is every x-th?
"Every x-th" refers to every item or occurrence that is separated by a specific interval of x. For example, "every 3rd" would mean every third item or occurrence in a sequence. This concept is often used to organize or categorize data, events, or items in a systematic way. **
-
Should one take Vitamin D3 with K2?
Yes, it is generally recommended to take Vitamin D3 with K2. Vitamin D3 helps with calcium absorption and bone health, while Vitamin K2 helps to ensure that calcium is properly utilized in the body and directed to the bones instead of accumulating in the arteries. Taking these two vitamins together can help support overall bone health and cardiovascular health. However, it is always best to consult with a healthcare provider before starting any new supplement regimen. **
Similar search terms for Audison-Thesis-TH-K2
-
Audison Thesis TH quattroAudison Thesis TH quattro is a 4-Channel Amplifier with A-Class functionality and a total RMS power of 1040 W; delivers 160 W x 4 at 4 Ohm, 260 W x 4 at 2 Ohm, and 340 W x 4 at 1 Ohm at 14.4 VDC, 1 % THD. Integrated 24-bit/192 kHz DA converter, SPDIF and AD Link digital inputs (optical), compatibility with Audison Full DA HD and Hi-Res audio files. Internal microprocessor for adjustment and management functions, digital control via integrated adjustment field, DRC, and PC software. Dual-Mono construction with four power supplies in Synchro-PWM, complementary differential circuit with current mirror, and cascoded A-Class drivers with inverted complementary triple output stage. Sensitivity control with 256 steps and 120 dB resolution, presets Energy Saving, Hi-Current, Hi-AB Class, and A Class selectable in real-time. Bandwidth 5–70 kHz, S/N 104 dBA, damping factor 80, supply voltage 11–15 VDC. Low Level Input available, Hi Level Input not available, digital input available; Remote In 7–15 VDC (1 mA), Remote Out 12 VDC (20 mA), power consumption at 14.4 VDC and 2 Ohm max. music power 105 A, idle current in off state 0.04 mA. Chassis made of solid, extruded aluminum, CNC manufactured; high-quality Crossover module included. Features 4-Channel Amplifier Integrated 24-bit/192 kHz DA converter Digital inputs: SPDIF (optical) and AD Link, up to 8 digital channels on RJ-45 Compatible with Audison Full DA HD and Hi-Res audio files Dual-Mono construction with four power supplies in Synchro-PWM Complementary differential circuit with current mirror Cascoded A-Class drivers with inverted complementary triple output stage Sensitivity control with 256 steps and 120 dB resolution Presets: Energy Saving, Hi-Current, Hi-AB Class, A Class, selectable in real-time Digital control via integrated adjustment field, DRC, and PC software High-quality Crossover module included Chassis made of solid, extruded aluminum, CNC manufactured Low Level Input: Yes Hi Level Input: No Digital input: Yes Technical Specifications Channels: 4 Amplifier Class: A-Class Supply Voltage: 11–15 VDC Idle current in off state: 0.04 mA Power consumption @ 14.4 VDC, 2 Ohm, max. music power: 105 A Remote OUT: 12 VDC (20 mA) Remote IN: 7–15 VDC (1 mA) THD: 0.03 % @ 1 kHz, 4 Ohm, 90 % power Bandwidth (-3 dB, 2 VRMS, 4 Ohm): 5–70 kHz S/N (A-weighted @ 1 V): 104 dBA Damping factor (1 kHz, 2 VRMS, 4 Ohm): 80 Input sensitivity Pre-In (two ranges): 0.3–4.8 VRMS Pre-In impedance: 15 kOhm Total RMS power: 1040 W Output power (RMS) @ 14.4 VDC, 1 % THD: 4 Channel @ 4 Ohm: 160 W x 4 Output power (RMS) @ 14.4 VDC, 1 % THD: 4 Channel @ 2 Ohm: 260 W x 4 Output power (RMS) @ 14.4 VDC, 1 % THD: 4 Channel @ 1 Ohm: 340 W x 4 Output power (RMS) @ 14.4 VDC, 1 % THD: 3 Channel @ 4 Ohm: 150 W x 2 + 540 W x 1 Output power (RMS) @ 14.4 VDC, 1 % THD: 3 Channel @ 2 Ohm: 250 W x 2 + 650 W x 1 Output power (RMS) @ 14.4 VDC, 1 % THD: 2 Channel @ 4 Ohm: 500 W x 2 Output power (RMS) @ 14.4 VDC, 1 % THD: 2 Channel @ 2 Ohm: 700...3149,78 €*Shipping: 0,00 €Secure redirect to the provider
-
Audison Thesis TH 1.5 II violinoThesis TH 1.5 II violino is a Dome Tweeter from Audison with a size of 38 mm and an impedance of 6 Ohms. The single-layer 34 mm CCAW voice coil and the custom N38 H-Grade neodymium magnet are integrated. The 38 mm natural silk dome, cone material TETOLON FIBER, and membrane material TELOTON FIBRE are specified. The frequency response ranges from 800 Hz to 26 kHz, with a peak power handling of 200 W. eID technology and the TH 1.5 II Violino Tuning System with floor housing or floor disc are present. An exclusive air loading system with a resonance frequency below 800 Hz, as well as FEM-optimized front plate and front spokes, are part of the fully solid metal construction. Features Dome Tweeter Size 38 mm Impedance 6 Ohms Peak power handling 200 W Frequency response 800 Hz to 26 kHz Single-layer 34 mm CCAW voice coil Neodymium magnet (N38 H-Grade) 38 mm natural silk dome eID technology TH 1.5 II Violino Tuning System (floor housing or floor disc) Exclusive air loading system (resonance frequency below 800 Hz; filter settings from 1.5 kHz, 12 dB/Oct.) FEM-optimized front plate and front spokes Fully solid metal construction Cone material TETOLON FIBER Membrane material TELOTON FIBRE Technical Specifications Voice coil diameter 34 mm Re 6.1 Ohms Fs 780 Hz Vas 0.019 l Mms 0.43 g Cms 0.09 mm/N BL 3.32 T·m Qms 2.9 Qts 0.83 Membrane area 38 cm² Le 0.025 mH Reference Efficiency 92.5 Sound pressure level 92.5 dB Weight 0.355 kg Dimension A 71.8 mm Dimension C 37.4 mm Dimension D 22.4 mm Power consumption with crossover: Hi-Pass at 1.8 kHz, 12 dB/Oct.735,85 €*Shipping: 0,00 €Secure redirect to the provider
-
Audison Thesis TH 6.5 II saxThesis TH 6.5 II sax is a 6.5 inch (16.5 cm) midbass driver from Audison with a nominal power handling of 150 W and a peak power handling of 300 W at 4 Ohm. The frequency response is specified as 40–4500 Hz, the linear excursion is 5.4 mm, and the sensitivity is 87 dB. The voice coil has a diameter of 50 mm and low inductance, with the voice coil material specified as Copper Clad Aluminium Ribbon. Neodymium is used as the magnet, including N48 H-Grade specification and geometrically optimized magnet group via Finite Element Simulation. The diaphragm is made of TPX® with simulated geometry, and the basket is one-piece aluminum die-cast with four pairs of spokes. The suspension and spider are designed as Hi-excursion, and eID technology is integrated. Features 6.5 Inch (16.5 cm) Midbass Driver Continuous Power Handling 150 W Peak Power Handling 300 W Impedance 4 Ohm Frequency Response 40–4500 Hz Xmax 5.4 mm Voice Coil Ø 50 mm Voice Coil Material CCAR (Copper Clad Aluminium Ribbon), Flat Wire Wound N48 H-Grade Neodymium Magnet Magnet Group Design via Finite Element Simulation Cone Material TPX® One-piece Aluminum Die-Cast Basket with Four Pairs of Spokes Low Inductance of the Voice Coil Hi-excursion Suspension and Spider eID Technology Technical Data Size 165 mm Voice coil material CCAP – Copper Clad Aluminium Ribbon D 130 mm Re 3.8 Ohm Fs 55 Hz Vas 8.6 l Mms 24.2 g Cms 0.35 mm/N BL 8.2 T·m Qms 5.3 Qes 0.47 Qts 0.43 Le 0.43 mH SPL 87 dB Weight 1.25 kg Dimension A 165 mm Measurement B 143 mm Measurement C 84 mm Measurement D 74.5 mm Measurement E 170.5 mm Measurement F 30978,04 €*Shipping: 0,00 €Secure redirect to the provider
-
Audison Thesis TH 3.0 II voceThe Audison Thesis TH 3.0 II voice is a 3 inch (8 cm) midrange driver with a size of 70 mm and an impedance of 4 Ohm. The frequency response ranges from 110 to 5700 Hz. It features a SPECIAL NEODYMIUM N38H magnet, a TPX® diaphragm, and a 30.5 mm voice coil made of Copper Clad Aluminum Ribbon. An aluminum demodulation ring, a motor geometry developed through finite element simulation, and an aluminum die-cast basket with four pairs of spokes are integrated. The suspension and spider are designed for high excursion. Xmax is 3.3 mm. eID technology for traceability is included. Features 3 inch (8 cm) midrange driver Size 70 mm Impedance 4 Ohm Frequency response 110 - 5700 Hz Voice coil Ø 30.5 mm Voice coil material CCAP - COPPER CLAD ALUMINUM RIBBON Peak power handling 110 W Continuous power handling 55 W Magnet material SPECIAL NEODYMIUM N38H Xmax 3.3 mm Diaphragm material TPX® Aluminum demodulation ring Motor geometry using finite element simulation software Basket made of aluminum die-cast with four pairs of spokes Suspension and spider designed for very high excursion eID Technology Technical Data D 66.75 mm Re 3.4 Ohm Fs 100 Hz Vas 1.01 l Mms 4.3 g Cms 0.59 mm/N BL 4.2 T·m Qms 5.5 Qts 0.48 Qes 0.52 Le Standard 0.18 mH Spl 85.6 dB Weight 0.25 kg Dimension A 84 mm Size B 73.5 mm Size C 45 mm Size D 37 mm Size E 89 mm Size F 18804,71 €*Shipping: 0,00 €Secure redirect to the provider
-
What is logical reasoning?
Logical reasoning is the process of using rational thinking and evidence to come to a conclusion or make a decision. It involves analyzing information, identifying patterns, and drawing valid inferences based on the available facts. Logical reasoning helps individuals to think critically, solve problems, and make sound judgments by following a systematic and coherent thought process. It is an essential skill in various fields such as mathematics, science, philosophy, and everyday decision-making. **
-
How does Vitamin D work together with K2?
Vitamin D and K2 work together synergistically to support bone health. Vitamin D helps the body absorb calcium from the intestines, while Vitamin K2 helps to direct the calcium to the bones and teeth, where it is needed, and away from soft tissues where it can be harmful. This collaboration between the two vitamins ensures that calcium is properly utilized in the body, promoting strong bones and overall health. **
-
Can you play ice hockey with K2 skates?
No, K2 skates are designed for inline skating and are not suitable for playing ice hockey. Ice hockey skates are specifically designed with a blade for gliding on ice and providing stability and control while playing the sport. Using K2 skates for ice hockey would not only be unsafe due to the lack of proper support and blade design, but it would also hinder the player's ability to perform on the ice. **
-
Where can one watch The K2 in German?
The K2 is available for streaming in German on the platform Rakuten TV. It is also available for purchase or rental on Amazon Prime Video in German. Additionally, the show may be available on other streaming platforms or TV channels that offer Korean dramas with German dubbing or subtitles. **
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases. ** Note: Parts of this content were created by AI.